The 3 Best Electric Scooters of 2023 on Amazon - Comparison

 Engine oils for my vehicle oil change

engine oils automotive

Hello everyone, this is RFQ from techipii blog, Today we are going to see together how to choose your oil well before draining your vehicle.

If you're like me, you're tired of being taken for a pigeon in the car or motorcycle garages to do the maintenance of your car, you will certainly do your own oil change like me, which costs less and gives you the certainty of whether it was done right and what products were installed in your vehicle.

It is not uncommon to hear testimonials from people who have left their car or motorcycle at the mechanic and who have not even had their vehicle drained or they have just removed the oil and replaced it with a cheaper oil that costs them absolutely nothing, sometimes even the old oils barely filter, the only solution to avoid all this is to do your oil change yourself.

 

Discover this article 

• 5 Things to Know About Oil Changes for Your Car

Discover our best OILS & FLUIDS store on the techipii shop.

1. What oil is used to drain your car?

The answer to this question can be found in your vehicle's owner's manual.

If you look at your car or motorcycle manual, you'll see that you're not limited to just one type of oil, and you're not limited to just one viscosity, that's because the oil has always a viscosity index written on the can, most of the time these 10w 40.

• 10 is the viscosity index at low temperature.
• The second after the W is the high-temperature viscosity index.

To see this product ⇒⇒ Click Here ⇐⇐

This indicator depends on your place where you live, therefore the manual does not list a single viscosity, it is well specified according to the temperature of the different viscosities, so So don't worry if you do not indicate exactly what that is already in your car, make sure that it corresponds to the table according to the temperature entered in the booklet.

Looking at this table, you can put 5w 30, you can even go up to 20w50, It really depends on the climatic conditions and the outside temperature, and of course, in the season course in which you do the oil change, you can very well put different oils in winter and summer.

How to read the characteristics of engine oil for your vehicle?

In most cases on the oil cans, you have the viscosity which is well indicated clearly visible on the front in large, while you have other standards which are indicated only on the back and often in very small which forces you to take the time to read.

I told you about the viscosity which is indicated in your manual.

There are standards in different countries, but the standards may be different.

You have the ACEA standard and the API standard.

In most cases it is a very commonly used API standard, if you look at the following image it looks like this:

It is written SN/CF and ACEA A3/B4, these standards don't bother you trying to decipher exactly what they correspond to, just keep that you have to find roughly the same as what is indicated in the manual. use of your vehicle.

In some cases you can get oil with a viscosity that is right for your vehicle rather than just worrying about the viscosity but not having the standards that match what is needed for your vehicle so the standards that I mentioned were API and ACEA, are also manufacturer-specific standards, as shown in the photo above: This oil also meets Volkswagen, BMW and Porsche standards, so these are very specific standards for these vehicles.

If you have a manufacturer looking for standards, actually two very specific manufacturers, you need oils that meet those specifications.

To see this product ⇒⇒ Click Here ⇐⇐

2. Can I put oil in my motorcycle?

All the stories of standards I'm talking about, it's not only applicable for cars, but it's also exactly the same standards for motorcycles, so some will say that for motorcycles you have to take exclusively motorcycle-stamped oils because they would have additives for the clutches for this kind of stuff and well know that when you look at the manuals of the motorcycles, if you really need a specific oil for this vehicle with components that are really adapted to this vehicle, well it is specified in The manual.

If it is not specified other than as I showed you for a car for example viscosity and an API, SL, or SN standard, normally you do not need anything else.

To see this product ⇒⇒ Click Here ⇐⇐

Personally, I have always done my oil changes on all my motorcycles with the same oil as for cars, perfectly standard oils, and I have never had the slightest problem, neither with the gearbox nor with the clutch. , nor the engine, it has always worked perfectly well, and the difference is that it costs two to three times less than those which are stamped directly on the motorcycle.

I never settle on a predefined brand in advance, I just look at the viscosity I'm looking for, the standards I'm looking for and I simply take what they have promotion and which corresponds to the expectations for my car, it's is the way to have the oil for the cheapest possible and of course quality oil.

Read also

1. Tips on car tires: size, wear indicators and inflation instructions
2. The best 3 accessories that you must buy for your car
3. How does the Tesla electric cars work in 2022?

I hope you have enjoyed the information I have given you about emptying a vehicle, you will have found it interesting, if so give me your opinion in the comments and share this article on social networks.

Thanks again for reading this article, see you next time.